eXtremeRate Retail

eXtremeRate Replacement Side Rails Handles for Xbox One Controller - Polished Gloss Red

2025-11-17T11:38:47+08:00

Produttore: eXtremeRate
Tipo: Xbox One Shells
Prezzo: 11.99

Fits Models:
Fit for Standard Xbox One Wireless Controller with 3.5mm audio jack.
Fit for Standard Xbox One Wireless Controller without 3.5mm audio jack.
Don't fit for Xbox One S controller.
Don't fit for Xbox One Elite Controller.

Quality Guarantee:
1. Fits flush for Xbox One controller.
2. Made of durable non-toxic ABS plastic. Odour free.
3. Work exactly like the original Xbox One controller parts

Installation Guide:
1. Take the panels off with open shell tools or simply by your fingers.
2. No opening shell or any complicated action is needed to install these panels.

Product Feature:
1. It is a beautiful change up from a boring normal black without spending a ton of $$$.
2. Personalize your Xbox One controller.
3. The broken lacquer design to make you feel comfortable and enhance your gaming experience.
4. These make your hands less sweaty.

Package Includes:
1 * Left Panel
1 * Right Panel
1 * Open Shell Tool

Note:
1. The controller, housing shells, tools and other parts are not included.
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate Replacement Front Housing Shell Case with Accent Rings for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - Glow in Dark Mecha - Yellow

2025-10-30T17:35:46+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 17.99

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and most vibrant paints to ensure our controllers are of high quality.
Believe me, your friend will admire you after installing this exclusive faceplate shell.

Read Before Purchase:
1. Please check the third picture of the listing. This product is only compatible with Xbox One Elite Series 2 controller (Model 1797); It is not compatible with other model controllers.
2. This is just a faceplate shell case with accent rings for Xbox One Elite Series 2 controller. The controller, bottom shell, buttons and other parts are not included.
3. Required customers to take apart the controller to replace your previous shell; Required customers handy with controller installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox Elite Series 2 Controller (Model 1797) Faceplate Installation Guide
5. Please install the accent ring, profile slots indicator kit and charge indicator kit on the faceplate before replacing the previous shell.
6. Note: After being exposed to the sun or light for 20~30 minutes, it will glow in the dark, which makes your controller shiny at night. More light will brighter and keep glowing in the dark longer.

Product Features:
1. Made of durable non-toxic ABS plastic. Odor-free.
2. Completely fits flush on all sides; Sit properly on all the clips.
3. Personalize your Elite Series 2 controller.
4. It is a beautiful change up from a boring normal black without spending a ton of money.
5. Great smooth grip, anti-slip, sweat-free for a long period of game playing.

Package Includes:
1* Faceplate shell
1* Open shell tool
2* Accent rings

Note:
1. The controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate Replacement Front Housing Shell with Side Rails Panel for Xbox One X & S Controller (Model 1708) - Black Premium Textured PU Leather

2025-10-27T17:13:10+08:00

Produttore: eXtremeRate
Tipo: Xbox One X & S Shells
Prezzo: 16.59

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and most vibrant paints to ensure our controllers are of the highest quality.
This is a quick easy way to customize your controller.

Read Before Purchase:
1. Please check the third picture of the listing. This product is compatible with Xbox One X & One S controller; It is not compatible with Xbox One Elite, Xbox One Standard and Xbox One Elite Series controller.
2. Package comes with a faceplate shell case and one pair back panels for controller. The controller, the bottom shell, buttons and other parts are not included.
3. Required customers to take apart the controller to replace your shell; Required customers handy with controller installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox One S/X Controller (Model 1708) Shells Installation Guide

Product Feature:
1. Made of durable non-toxic ABS plastic and PU leather. Odour free.
2. It is a beautiful change up from a boring normal black without spending a ton of money.
3. Personalize your Xbox One X or Xbox One S controller.
4. Perfectly combined soft PU textured leather with hard plastic, features unique leather texture offers good grip and comfortable hand feeling with leather outside finish.

Package Includes:
1* Front shell
1* Right side rails
1* Left side rails
1* Open shell tool
1* T8H screwdriver
5* Screws

Note:
1. The controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate Lofty Remappable Remap & Trigger Stop Kit for Xbox One X & S Controller - Textured Black

2025-10-27T17:11:37+08:00

Produttore: eXtremeRate
Tipo: Xbox One S/X Custom Upgrade Kits
Prezzo: 29.99

Prepared for e-Sport Tournaments:
1. The ExtremeRate LOFTY remap kit is an evolutionary DIY customized kit that adds advanced gaming functionality to your existing Xbox One S & One X controller.
2. With this remap kit, you can easily turn your existing Xbox One S & One X controller into a professional e-Sport gamepad with an additional 2 remappable remap buttons and trigger stop mechanism.
3. This remap kit solution gives you a competitive edge in online gaming and tournaments, and totally legal.
4. You can remap 14 buttons to the 2 additional buttons which will be pressed by your middle fingers.
5. It's a huge advantage for you because you don't need to move off the sticks and triggers to access other buttons like ABXY action buttons during a fast FPS or shooter games.
6. With hair trigger buttons, simply slide it to the short trip, you can fire faster and save valuable time with each trigger pull.
7. The redesigned bottom shell and side rails look great. Great smooth grip, soft in hand and feels silky; Anti slip, sweat free for a long period game playing.

NOTICE:
1. ONLY compatible with Xbox One S & One X controller 1708 model; Not compatible with Xbox One standard controller.
2. You need to remove the battery cover and battery from the bottom case to check the model number.
3. Controller is NOT included.
4. Racing game only works on long trip type.

Installation Tips:
1. Installation difficulty: high
2. Patience needed: high
3. Please read the instructions and view the installation video carefully before installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox One X/S Controller (Model 1708) LOFTY Remap Kit Installation Guide
5. If you have any problems during the installation process, please feel free to send us a message.
6. The FPC board needs to be soldered and the FPC board should be fixed with double-sided tape before soldering.
7. When soldering, please be careful not to pull the Lotfy-FPC, the soldering time of each TP point is less than 1 second.
8. After soldering, it can be tested with the Lofty test board.
9. If all the LEDs on the tester board are not lit, please check the P2 and TP11 solder points whether soldering correctly.
10. If only some of the LEDs are not lit, please check the corresponding solder points whether soldering correctly.
11. eXtremeRate innovated 2 types of operation to enter buttons remap type: touch control and buttons combination. If you are worried about accidentally touching the touch sensor during the game, you can cut down the whole foil wire of touch control.
12. You can activate the remap function during the game and assign maximum 14 buttons (A, B, X, Y, L3, R3, LT, RT, LB, RB, Up, Down, Left and Right ) to the back buttons.

Package Included:
1* Lofty Remap Part
1* Lofty Tester Board
1* Lofty FPC1 & FPC2
1* Re-designed Back Shell with Battery Cover
1* Left Right Side Rails
2* Back Buttons
2* Trigger Stop Buttons
1* Prying Tool
1* Cross Screwdriver
1* T8h Screwdriver
1* T6 Screwdriver
20* Screws
1* Spare Parts Pack

eXtremeRate Replacement Front Housing Shell for Xbox One X & S Controller (Model 1708) - Tiger Skull

2025-10-27T17:10:56+08:00

Produttore: eXtremeRate
Tipo: Xbox One X & S Shells
Prezzo: 14.99

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and most vibrant paints to ensure our controllers are of the highest quality.
Believe me, your friend will admire you after install this exclusive faceplate shell.

Read Before Purchase:
1. Please check the third picture of the listing. This product is compatible with Xbox One S & Xbox One X controller (Model 1708); It is not compatible with Xbox One Elite & Xbox One standard controller.
2. This is a faceplate shell case for the controller. The controller, the bottom shell, buttons and other parts are not included.
3. The texture is not a rubberized finish. Instead, it is semi-slick, matte soft plastic.
4. Required customers to take apart the controller to replace your shell; Required customers handy with controller installation.
5. Tap here to check the installation guide video: eXtremeRate Xbox One S/X Controller (Model 1708) Faceplate Installation Guide

Product Feature:
1. Made of durable non-toxic ABS plastic. Odour free.
2. Completely fits flush on all sides; Sit properly on all the clips.
3. Personalize your Xbox One S or Xbox One X controller.
4. It is a beautiful change up from a boring normal black without spending a ton of money.
5. Great smooth grip, soft in hand and feels silky; Anti slip, sweat free for a long period game playing.

Package Includes:
1* Front Shell
1* Prying Tool
1* T8H Screwdriver
5* Screws

Note:
1. The controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate Full Set Shell with Buttons for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - Emerald Green

2025-10-27T17:08:59+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 24.99

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and material to ensure our controllers are of the highest quality.
Believe me, your friend will admire you after installing this exclusive shell.

Read Before Purchase:
1. This product is only compatible with Xbox One Elite Series 2 & Elite Series 2 Core Controller (Model 1797); Not compatible with other Controllers. Please check the third picture of the listing before purchase to verify your controller's compatibility
2. This is a full set shell with buttons for Xbox Elite 2 controller. The controller and other parts are not included.
3. Required customers to take apart the controller to replace your original shell; Required customers handy with controller installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox Elite Series 2 Controller (Model 1797) Full Set Shell Installation Guide

Product Feature:
1. Made of durable, non-toxic plastic material. Odour free.
2. Completely fits flush on all sides; Sits properly on all the clips.
3. Personalize your Xbox Elite 2(Core) controller.
4. It is a beautiful change up from boring normal black without spending a ton of money.

Package Includes:
1* Front shell
1* Back shell
1* ABXY buttons
1* View/Menu/Profile buttons
1* RT/LT/RB/LB/Middle bar
1* Left/Right trigger stop switches
3* Screwdrivers (T8H/T6/T3)
1* Open shell tool
32* Screws
4* Springs
Note: The left and right side rails, back paddles, Dpad, thumbsticks, home buttons, controller and other parts are NOT INCLUDED.

eXtremeRate Full Set Shell with Buttons for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - Clear Black

2025-10-27T17:08:59+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 24.99

eXtremeRate Full Set Shell with Buttons for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - Clear Green

2025-10-27T17:08:58+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 24.99

eXtremeRate Full Set Shell with Buttons for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - Clear Atomic Purple

2025-10-27T17:08:58+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 24.99

eXtremeRate Full Set Shell with Buttons for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - Clear

2025-10-27T17:08:57+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 24.99

eXtremeRate Replacement Front Housing Shell Case with Accent Rings for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - The Great GOLDEN Wave Off Kanagawa - White

2025-10-27T17:05:30+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 17.99

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and most vibrant paints to ensure our controllers are of high quality.
Believe me, your friend will admire you after installing this exclusive faceplate shell.

Read Before Purchase:
1. Please check the third picture of the listing. This product is only compatible with Xbox One Elite Series 2 controller (Model 1797); It is not compatible with other model controllers.
2. This is just a faceplate shell case with accent rings for Xbox One Elite Series 2 controller. The controller, bottom shell, buttons and other parts are not included.
3. Required customers to take apart the controller to replace your previous shell; Required customers handy with controller installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox Elite Series 2 Controller (Model 1797) Faceplate Installation Guide
5. Please install the accent ring, profile slots indicator kit and charge indicator kit on the faceplate before replacing the previous shell.

Product Features:
1. Made of durable non-toxic ABS plastic. Odor-free.
2. Completely fits flush on all sides; Sit properly on all the clips.
3. Personalize your Elite Series 2 controller.
4. It is a beautiful change up from a boring normal black without spending a ton of money.

Package Includes:
1* Faceplate shell
1* Open shell tool
2* Accent rings

Note:
1. The controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate Replacement Front Housing Shell Case with Accent Rings for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - The Great Wave

2025-10-27T17:05:11+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 17.99

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and most vibrant paints to ensure our controllers are of high quality.
Believe me, your friend will admire you after installing this exclusive faceplate shell.

Read Before Purchase:
1. Please check the third picture of the listing. This product is only compatible with Xbox One Elite Series 2 controller (Model 1797); It is not compatible with other model controllers.
2. This is just a faceplate shell case with accent rings for Xbox One Elite Series 2 controller. The controller, bottom shell, buttons and other parts are not included.
3. Required customers to take apart the controller to replace your previous shell; Required customers handy with controller installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox Elite Series 2 Controller (Model 1797) Faceplate Installation Guide
5. Please install the accent ring, profile slots indicator kit and charge indicator kit on the faceplate before replacing the previous shell.

Product Features:
1. Made of durable non-toxic ABS plastic. Odor-free.
2. Completely fits flush on all sides; Sit properly on all the clips.
3. Personalize your Elite Series 2 controller.
4. It is a beautiful change up from a boring normal black without spending a ton of money.

Package Includes:
1* Faceplate shell
1* Open shell tool
2* Accent rings

Note:
1. The controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate Replacement Front Housing Shell Case with Accent Rings for Xbox One Elite Series 2 & Elite 2 Core Controller (Model 1797) - Blue Flame

2025-10-27T17:05:04+08:00

Produttore: eXtremeRate
Tipo: Xbox One Elite Series 2 shells
Prezzo: 17.99

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and most vibrant paints to ensure our controllers are of high quality.
Believe me, your friend will admire you after installing this exclusive faceplate shell.

Read Before Purchase:
1. Please check the third picture of the listing. This product is only compatible with Xbox One Elite Series 2 controller (Model 1797); It is not compatible with other model controllers.
2. This is just a faceplate shell case with accent rings for Xbox One Elite Series 2 controller. The controller, bottom shell, buttons and other parts are not included.
3. Required customers to take apart the controller to replace your previous shell; Required customers handy with controller installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox Elite Series 2 Controller (Model 1797) Faceplate Installation Guide
5. Please install the accent ring, profile slots indicator kit and charge indicator kit on the faceplate before replacing the previous shell.

Product Features:
1. Made of durable non-toxic ABS plastic. Odor-free.
2. Completely fits flush on all sides; Sit properly on all the clips.
3. Personalize your Elite Series 2 controller.
4. It is a beautiful change up from a boring normal black without spending a ton of money.

Package Includes:
1* Faceplate shell
1* Open shell tool
2* Accent rings

Note:
1. The controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate Metal Aluminium Thumbsticks for Xbox One Controller - Gold

2025-08-14T15:32:32+08:00

Produttore: eXtremeRate
Tipo: Xbox One Buttons
Prezzo: 9.99

Compatibility
Fits for Xbox One controller with 3.5 mm jack.
Fits for Xbox One controller without 3.5 mm jack.
Work exactly like Xbox One thumbsticks

Product Features:
1. Made of durable and sturdy metal.
2. Your fingers aren't slipping off the thumb-sticks anymore if you replace these.
3. Concave in the middle and ridged outer rim help you keep your thumbs on the thumb sticks while playing games.
4. The groove on these make gaming on the Xbox One much better.
5. The texture of thumbsticks feels good.
6. Easy to swap out. You'll need a T8 screw driver(not included)
7. Personalize your Xbox One controller.

Package Includes:
2 pcs Xbox One Controller Thumbsticks
Note: The controller, tools and other parts are not included.

eXtremeRate Replacement Front Housing Shell for Xbox One X & S Controller (Model 1708) - Chrome Pink

2025-03-13T14:21:39+08:00

Produttore: eXtremeRate
Tipo: Xbox One X & S Shells
Prezzo: 13.99

We know that your controller shell is more than just a plastic accessory.
It is your sidekick, your wing man, your battle buddy.
This is why we use only the best parts and most vibrant paints to ensure our controllers are of the highest quality.
Believe me, your friend will admire you after install this exclusive faceplate shell.

Read Before Purchase:
1. Please check the third picture of the listing. This product is compatible with Xbox One S & Xbox One X controller (Model 1708); It is not compatible with Xbox One Elite & Xbox One standard controller.
2. This is a faceplate shell case for the controller. The controller, the bottom shell, buttons and other parts are not included.
3. Required customers to take apart the controller to replace your shell; Required customers handy with controller installation.
4. Tap here to check the installation guide video: eXtremeRate Xbox One S/X Controller (Model 1708) Faceplate Installation Guide

Product Feature:
1. Made of durable non-toxic ABS plastic. Odour free.
2. Completely fits flush on all sides; Sit properly on all the clips.
3. Personalize your Xbox One S or Xbox One X controller.
4. It is a beautiful change up from a boring normal black without spending a ton of money.
5. A variety of styles and designs are available.

Package Includes:
1* Front Shell
1* Prying Tool
1* T8H Screwdriver
5* Screws

Note:
1. The controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.

eXtremeRate 5pcs Removable Logo Power Button LED Sticker Decal for Xbox One Console - Blue

2025-03-04T11:30:41+08:00